|
M&R Challengers |
|
PRESS TECH [ph 817-244-7128][fax 817-244-7909] Parts meet or exceed OEM Prices subject to change without notice |
|
12/29/2009 |
This page printable for catalog use. |
|
|
Challenger [CH,CHR] ['86-'88 pin index drive, '88-'92 tolomatic index drive,'92-'96 Mosier index drive] Omron CPU |
|
Challenger II [CHII] ['96-present Servo index drive] Mitsubishi CPU |
|
|
(XXXXXX) early factory part numbers |
|
|
B-press base parts, E-electrical, F-fasteners, H-press head components, K-knobs & levers, P-pneumatics, T-press table components, SS stainless steel |
|
| Item | Picture |
Description |
Price |
| BIB0FL16 |
 |
Index bushing & o-ring
CH8, CH10
 |
29.00 |
| BIB0FL24 |
 |
Index bushing
CH12,
CH14
|
44.00 |
| BIS034X1 (3025001) |
|
3/4"x1" index shock-air drive
[use PSSC0034 stop collar with PSJN0034 when old units
cannot be removed from old shock]
CH |
229.00 |
| BIS118X1 (3025000) | Enertrol 1 1/8"x1" index shock-air drive [use PSSC0118 stop collar with PSJN0118 when old units cannot be removed from old shock] CH | 338.00 | |
| BSJN0034 (3025001A) |
 |
3/4" Index shock jam nut CH-all | 11.00 |
| BSJN0118 (3025000A) |
 |
1 1/8" Index shock jam nut CH-all | 14.00 |
| BLS002081 (9080215) |
 |
Lift cylinder cap compression spring CH, CHII | 8.00 |
| BRB11834 (9050260) |
 |
Reducer bushing for 3/4" index shock in place of 1-1/8" index shock CH-all w/air indexer | 55.00 |
| BSSC0034 (8051259) |
 |
3/4" Index shock stop collar
CH-all
|
39.00 |
| BSSC0118 (8051260A) |
|
1 1/8" Index shock stop
collar
CH-all
|
51.00 |
| EBBC2081 | Omron 8 unit rack for C200H CPU 10 station CH | 230.00 | |
| EBTC2H09 |
 |
C200H battery CH |
70.00 |
| ECBST01R (1010002A) |
 |
N/C E/stop, selector switch, re-set switch contact block (RED) CH |
7.00 |
| ECBST10G (1010002B) |
 |
N/O E/stop, selector switch, re-set switch contact block (GREEN) CH |
7.00 |
| ECBSTD00 |
 |
Dummy E/stop, re-set switch contact block [has no terminal screw contacts] CH |
0.50 |
| ECMID212 (1017001) | ID212 Omron input module C220H CH | 0.00 | |
| ECMLK201 (1017013A) | LK201 Omron link module C200H CH | 0.00 | |
| ECMMD215 (1017005) |
 |
MD215 input/output module C200H CH |
415.00 |
| ECMOC222 (1017002) | OC222 Omron output module C200H CH | 0.00 | |
| ECPMR831 (1017004) | MR831 Omron memory module/battery back-up C200H CH | 0.00 | |
| ECPU200HR (1017000) |
 |
C200H CPU01-E CPU re-built CH [OBSOLETE AS NEW] |
CALL |
| ECRRH2B1 (1011005) |
 |
Relay RH2BUL-120VAC 2 pole 8 pin CHII |
13.00 |
| ECRRH2B4 (1011017) | See above |
Relay RH2BUL-24VDC 2 pole 8 pin
CHII |
0.00 |
| ECRRH4B1 (1011021) |
Relay RH4BUL-120VAC 4 pole 14
pin CHII |
0.00 | |
| EDD31022 (1013003) |
 |
LED digital diagnostic display CH |
63.00 |
| EDR100RT |
 |
Right digital display resistor [wire #3] CH | 3.50 |
| EDR220LT |
 |
Left digital display resistor [wire #4] CH | 3.50 |
| EDS1N4F3 |
 |
Diode set for single/double print switch CH | 8.50 |
| EESAO300 |
 |
AOD-100 E-stop push/push body (without red button) CH |
21.00 |
| EESAYW40 (1010000A) |
 |
AYW401-R Idec push/pull E/stop CHII |
0.00 |
| EFC00C90 |
 |
Fan cord for 2 prong fan CH, CHII | 3.00 |
| EFG00004 |
 |
4" Fan guard CH, CHII | 2.50 |
| EFN115V4 (1009000) |
 |
4" Cooling fan CH, CHII | 29.00 |
| EFNON001 |
 |
NON 1 amp fuse
CH, CHII
 |
2.00 |
| EFNON003 | See above | NON 3 amp fuse CH | 2.00 |
| EFNON005 | See above | NON 5 amp fuse CHII | 2.00 |
| EFNON020 | See above | NON 20 amp fuse CHII | 2.00 |
| EILD60YD (1013002) |
 |
Yellow indicator lamp w/resistor-double
stroke CH
 |
3.50 |
| EILS60GD (1013001) |
 |
Green indicator lamp w/resistor-single
stroke CH
|
3.50 |
| EMA07803 (1010007) |
 |
Manual/auto switch and print start/print finish switch CH |
14.50 |
| EPB00172 (1010006) |
 |
Print push button switch CH |
14.25 |
| EPC0H7EC (1017006) |
 |
Omron print counter H7EC-N-B [replaces obsolete H7EC-BLM model] CH | 72.00 |
| EPCCAB27 | Omron PRO 27 programmable console cable | 0.00 | |
| EPCPRO27 | Omron PRO 27 programmable console | 0.00 | |
| EPP03180 (1020035) |
 |
No-shirt detector 3 pin plug [black-pin #1 wire #3, red+green-pin #2 wire #4, white-pin #3 signal wire OR blue-pin #1 wire #3, pink+brown-pin #2 wire #4, black-pin #3 signal wire for MICRO FE7C-RC6G-M sensor] CH, CHII | 9.00 |
| EPS04180 (1020035) | No-shirt detector 3 pin socket [see above for wiring] CH, CHII | 8.50 | |
| ERPCYE2M (1010224) |
 |
4 pin plug-in round prox switch cable 2M CHII |
21.00 |
| ERPCYE5M (1010224L) | SEE ABOVE |
4 pin plug-in round prox switch cable 5M GTII outside proxs |
24.00 |
| ERPGM53A (1010012) (320012) |
 |
Round prox switch 3 wire w/terminal ends [blue-#3, brown-#4, black-signal (double digit #)][other brands black-#3, red-#4, white-signal wire (double digit#)] CH, CHII |
52.50 |
| ERS0SH2B (1011006) |
 |
Relay socket for RH2B 8 pin CHII |
9.00 |
| ERS110NG (1010001) |
 |
Reset switch ABD110N-G CH |
27.00 |
| ESC028FR (8050121) |
 |
Half safety cord right female end CH, CHII | 25.00 |
| ESC028ML (8050120) |
 |
Half safety cord left male end CH, CHII | 21.00 |
| ESC0MH40 |
 |
Full safety cord for missing head 40" CH, CHII | 31.00 |
| ESC50MFC (8050101) |
|
Full safety cord 50" CH, CHII | 31.00 |
| ESD10013 (1010013) |
 |
Single/double switch ON/OFF/ON SPDT
CH
 |
8.25 |
| ESPF703A (1010005) |
 |
Square prox switch w/terminal ends [blue-#3, brown-#4, black-signal (double digit #)][other brands black #3, red-#4, white-signal wire (double digit#)] CH, CHII |
40.00 |
| ESR01200 (7006000) |
 |
Strain relief bushing for safety cord CH, CHII | 0.25 |
| ESS3L20N |
 |
ASD3L20N 3 position selector switch body CH |
11.00 |
| ETP10011 (1010011) |
 |
Front/rear position switch ON/ON
|
8.25 |
| ETW6502A (1010010) |
 |
Dwell timer thumbwheel switch CH |
19.00 |
| EVR175DC (1023000) |
 |
Varistor 175 VDC 10A CH, CHII | 0.00 |
| EVR250DC (1023001) |
|
Varistor 250 VDC 20A CH, CHII | 0.00 |
| EWT0004 |
 |
Wire tie 4" type I class | 0.05 |
| EWT1614F (1003006) |
 |
BLUE female spade terminal end 14-16 ga
 |
0.80 |
| EWT1614M (1003007) |
 |
BLUE male spade terminal end 14-16 ga |
0.80 |
| EWT1806F (1003008) |
 |
RED flange fork terminal 18-22 ga #6 stud | 0.50 |
| EWT2218F (1003005) |
 |
RED female spade terminal end 18-22 ga
|
0.50 |
| EWT2218M (1003004) |
 |
RED male spade terminal end 18-22 ga |
0.15 |
| FAB12214 (3047001) |
 |
1/2" concrete anchor bolt | 1.25 |
| FAB51625 (3047000) |
 |
5/16" concrete anchor bolt | 1.00 |
| FBH01412 (3001005) |
 |
BHC screw 1/4"-20x1/2" | 0.20 |
| FBH01458 (3001010) |
 |
BHC screw 1/4"-20x5/8" | 0.20 |
| FBH05161 (3001007) |
 |
BHC screw 5/16"-18x1" | 0.35 |
| FBH3824P (3001078) |
 |
BHC screw 3/8"-24x1 1/2" [Alternative for welded broken pallet leveling stud on end of pallet arm. Must be welded.] | 1.50 |
| FCS01024 (3008016) |
 |
10-24x1/2" hex screw [base cover] CH | 0.10 |
| FCS1024M |
 |
SHC screw
10-24x1" index plate bushing mount
CH |
0.20 |
| FCS1032L |
 |
SHC screw 10-32x1 1/2" lift valve mount CH, CHII | 0.25 |
| FCS1420M (3009018) |
 |
SHC screw 1/4"-20x1 1/4" [fork cyl mounting] CH | 0.25 |
| FCS381614 (3009030) |
 |
SHC screw 3/8"-16x1 1/4" [index plate] CH | 0.30 |
| FCS38162 (3009073) |
 |
SHC screw 3/8"-16x2" [registration bolt] CH, CHII | 2.00 |
| FCS51681 (3009003) |
 |
SHC screw 5/16"-18x1" | 0.25 |
| FCS83234 (3009032) |
 |
SHC screw 8-32x3/4" [air lock cyl mount] CH, CHII | 0.25 |
| FCT00001 |
 |
1" carpet tape [stroke cyl to carriage mount (4.5") and indexer plate to bushing mount (2/75"x2)] CH per/in. | 0.10 |
| FCT00002 |
 |
2" carpet tape [indexer plate to bushing mount carriage] CH12, CH14 per/in. | 0.20 |
| FFC10241 | 10-24x1" flat head cap screw [shock block mount] early CH | 0.00 | |
| FFC51634 (3010008) |
 |
Flat head cap screw 5/16"-18x3/4" [capture fork lockdown plate] CH | 0.15 |
| FFS63212 (3004002) |
 |
Flat head machine crew 6-32x1/2" [cabinet door] CH, CHII | 0.10 |
| FFW00038 (3020010) |
 |
3/8" SAE flat washer | 0.05 |
| FFW0012L (3020004) |
 |
1/2" Flat washer USS [head and arm mounting] | 0.20 |
| FFW0012S (3021000) |
 |
1/2" Flat washer SAE [head and arm mounting] | 0.15 |
| FFW00014 (3020005) |
 |
1/4" Flat washer | 0.05 |
| FFW00058 (3020024) |
 |
5/8" Flat washer | 0.30 |
| FFW00078 (3020009) |
 |
7/8" Flat washer | 0.35 |
| FFW00516 (3020007) |
|
5/16" Flat washer | 0.10 |
| FFWM10SS |
 |
#10 SS Flat washer 13/64"ID, 1/2"OD, .047TH [squeegee/flood bar lock down lever] | 0.05 |
| FFWS10SS |
|
#10 SS Flat washer 13/16"ID, 7/16"OD, .032TH [squeegee/flood bar lock down lever] | 0.05 |
| FHB14206 (3008003) |
 |
1/4"-20x5/8" Hex head bolt [squeegee/flood bar angle adjustment] CH | 0.10 |
| FHB381615 (3008005) |
 |
3/8"-16x1 1/2" Full threaded hex bolt [for mounting flash unit to head] CH | 0.25 |
| FHN00632 |
 |
6-32 Hex nut for cabinet panel screw | 0.05 |
| FHN01213 (3013027) |
 |
1/2"-13 Hex nut [head and arm mounting bolts] | 0.10 |
| FHN01220 (3013002) |
 |
1/2"-20 Hex nut [screen holder mounting rods] | 0.15 |
| FHN03816 (3013007) |
 |
3/8"-16 Hex nut | 0.10 |
| FHN03824 (3013008) |
|
3/8"-24 Hex nut | 0.10 |
| FJN01220 (3013023) |
|
1/2"-20 Jam nut | 0.25 |
| FJN01428 (3013005) |
 |
1/4"-28 Jam nut [chopper cylinder] CH | 0.05 |
| FJN03416 |
 |
3/4"-16 Jam nut grade 5 [RA-75] CH | 1.00 |
| FJN03816 (3013014) |
 |
3/8"-16 Jam nut | 0.10 |
| FJN03824 (3013015) |
 |
3/8"-24 Jam nut [Pallet leveling jam nuts] | 0.10 |
| FJN05818 |
|
5/8"-18 Jam nut | 0.60 |
| FJN07814 |
 |
7/8"-14 Jam nut | 0.65 |
| FJN51618 |
|
5/16"-18 Jam nut | 0.10 |
| FJN51624 |
|
5/16"-24 Jam nut [rod end stroke cylinder] CH-pin drive | 0.10 |
| FLN01024 (3012002) |
 |
10-24 Nylon lock nut | 0.10 |
| FLN01420 (3012000) |
 |
1/4"-20 Nylon lock nut | 0.10 |
| FLW00014 (3022001) |
 |
1/4" Lock washer | 0.03 |
| FLW00038 (3022002) |
 |
3/8" Lock washer | 0.05 |
| FPB58034 (3023035) | Pin bushing-lower 5/8"IDx7/8"ODx3/4"L CH-pin drive | 0.00 | |
| FPB58134 (3023033) | Pin bushing-upper 5/8"IDx7/8"ODx 1 3/4"L CH-pin drive | 0.00 | |
| FPS63278 (3005008) |
 |
6-32X7/8" Proximity switch mounting screw CH | 0.05 |
| FRE1220FS (310224) |
 |
1/2"-20 Female rod end w/set screw CH-pin drive | 13.50 |
| FRE1428F (3034000) |
 |
1/4"-28 Female rod end-CHOPPER cyl CH | 5.50 |
| FRE3824F (3034002) |
 |
3/8"-24 Female rod end-MICRO adj. CH | 7.00 |
| FRE3824ML (3034003L) |
 |
3/8"-24 Male rod end long stud w/nut [MICRO pivot] CH | 7.00 |
| FRE3824MS (3034003S) |
|
3/8"-24 Male rod end short stud w/nut [MICRO pivot] CH | 7.00 |
| FRE51624F (3034001) |
 |
5/16"-24 Female rod end [STROKE cyl/CAPTURE fork cyl rod] CH, CHII | 6.00 |
| FRG0058S |
 |
Grommet 5/8"Hx1/8"GWDx7/8"G | 0.40 |
| FRG0932AL |
 |
Grommet 9/32"Hx5/32"GWDx3/8"G | 0.25 |
| FRG1764AL |
 |
Grommet 17/64"Hx1/8"GWDx13/32"G [chopper airlines through carriage top plate HTP131RA] | 0.25 |
| FRS63212 (3004002) |
|
6-32x1/2" Pan head cabinet screw | 0.10 |
| FRS83212 |
 |
8-32x1/2" Pan head cabinet screw [for enlarged holes] | 0.10 |
| FSB01412 (3006002) |
 |
1/4"x3/4"x10-24 Pivot mount shoulder bolt [for flip-up screen holder] CH | 1.50 |
| FSB03834 (3006009) |
 |
3/8"X3/4"X5/16"-18 Shoulder bolt | 2.00 |
| FSB1458A |
 |
1/4"x5/8"x10-24 shoulder bolt, w/nut and washers [chopper cylinder connection to mounting bar] CH | 2.00 |
| FSB51612 (3006010) |
 |
5/16"x3/4"x1/4"-20 Shoulder bolt w/nut [clevis fork rod end attachment] CH, CHII | 2.00 |
| FSR00025 (3024015) |
 |
1/4" External snap ring [chopper cyl to bar adjuster attachment] CH | 0.15 |
| FSR15625 (3024000) |
 |
1 9/16" Internal snap ring [index pillow block (FL16) bushing retainer] CH-small | 0.75 |
| FSS14114 (3007007) |
 |
1/4"-20x 1 1/4" Set screw [flip up screen holder lockdown] CH | 0.50 |
| FSW02153 (9102153) |
 |
Spherical washer for pallet leveling CH, CHII | 1.00 |
| FTC03816 (9012111) |
 |
3/8"-16IDx9/16-12OD Threaded insert for repairing stripped-out holes (use 31/64" or 1/2" drill bit w/red loctite on outer threads) | 1.25 |
| FWL1213S (3003003) |
 |
1/2"-13x1 1/4" Whiz lock bolt [indexer mount] CH, CHII | 1.40 |
| FWL3816S (3003000) |
 |
3/8"-16x1" Whiz-lock bolt [arm attachment] CH, CHII | 0.60 |
| HAB0109A (8080109) |
 |
Bar adjuster
[chopper cylinder to top plate adjuster] CH
(improved-additional threaded hole added 180 degrees across)
TIP: Coat center threads with anti-siege compound to eliminate cross threading of HCA3816A shaft |
63.00 |
| HBS00250 (8010013) (310630) |
 |
Barbed clamp stud 3/8"-16x2.5" ALL | 4.50 |
|
HBS07516 (9161005)
|
 |
Head bumper shock. Made of Elastomer which outlasts polyurethane bunpers and chemical resistant. Fits all air drive heads. Use old shock jam nut to mount bumper. To set position on NON stroke adjuster, turn bumper until it touches carriage at end of stroke, then turn bumper 3 full turns and lock jam nut. | 28.50 |
| HCA3816A |
 |
Top plate chopper adjustment knob and stud assembly CH | 8.00 |
| HCP14X1A |
 |
Chopper pin w/snap ring [for cylinder to bar adjuster connection] CH | 1.50 |
| HCR01043 (3030007) |
 |
1 " Thomson carriage rail 43" long CH [41" OAL Tolomatic] | 75.00 |
| HCS0250A (8010013) |
 |
Barbed clamp stud/knob assembly 3/8"-16x2.5" w/footpad CH,CHII | 9.50 |
| HCW40217 (8010005) (310631) |
 |
Cup washer (foor pad) [for screen lockdown and squeegee clamp] CH, CHII | 1.00 |
| HCXUFQRT |
 |
PRESS TECH quick release mounting tube for Omni-Uni/CX flash w/bolts CH | 10.00 |
|
HEPF03CH
(8062103)
|
 |
Head front carriage end plate with shock mounting threads and with top and bottom screws [it must be stated at order if head has front adjustable stroke] CH | 90.00 |
| HHS75045 (3025002) (310632) |
 |
Head shock 3/4"-16x3" CH, CHII | 57.00 |
| HLB160HD (3023007) |
 |
1" Heavy Duty stainless steel linear ball bearing for carriage slide rail "will last longer than original" CH, CHII |
43.00 |
| HLPK62WH (3037001) |
 |
Swivel base leveling foor guide w/holes CH | 15.00 |
| HMA0056A (8090056) |
 |
Micro adjuster (left/right) CH, CHII | 8.50 |
| HMA0057A (8090057) |
 |
Micro adjuster (up/down) CH, CHII | 8.00 |
| HMLW0010 (8080132) |
 |
Micro lockdown washer CH, CHII | 9.75 |
| HOS1201A (8090034L) |
 |
Spacer-off contact stud sleeve SS 1/2"x1" (lower) CH | 2.50 |
| HOS12045 (8090034L) |
 |
1/2"-20x4.5" Off contact stud rear w/micros CH | 4.00 |
| HOS12090 (8080154) |
|
1/2"-20x9" Off contact stud front CH | 6.50 |
| HOS1234A (8090034U) |
|
Spacer-off contact stud sleeve SS 1/2"x3/4" (upper) CH | 2.25 |
| HPM80143 (8080143) |
 |
Hanger bracket mount (pivot) for flip-up screen holder CH | 21.00 |
| HSB01010 |
 |
Elastomer shock bumper-medium 1.09"x.98" replacement for HBS07516 | 12.00 |
| HSH1712M |
 |
17" Re-built screen holder,1/2" mounting holes, steel threaded inserts, new manual lockdown knobs w/foot pads (EXCHANGE ONLY) later CH | 25.00 |
| HSH1738M |
 |
17" Re-built screen holder, 3/8" mounting holes, steel threaded inserts, new manual lockdown knobs w/foot pads (EXCHANGE ONLY) early CH | 25.00 |
| HSL903FS |  |
Flood/Squeegee speed labels (7009001 Flood) (7009005 Squeegee) CH | 1.25 |
| HSP0REPR |
|
Repair broken flip-up screen holder (steel) with reinforcing straps for added strength to eliminate future breaks. (REPAIRED PLATE ON THE RIGHT) [NOT A STOCKING ITEM] | 37.50 |
| HTP00130 (8090130) |
 |
Head top plate w/air lock holes CH | 8.00 |
| HTP045LA (8090045) |
 |
Carriage chopper adjustment top plate
assembly-left CH
TIP: Coat threads with anti-siege compound to eliminate cross threading of HAB0109A |
32.00 |
| HTP131RA (8090131) |
 |
Carriage chopper adjustment top plate
assembly right CH
TIP: Coat threads with anti-siege compound to eliminate cross threading of HAB0109A |
35.00 |
| KDH00425 (3033008) |
 |
Molded handle on control panel boom CH | 3.00 |
| KEKABD3B |
 |
E-stop mushroom knob push/push for EESAO100 CH |
8.50 |
| KFL1420F (3033016) |
 |
Flip-up screen holder female lockdown lever 1/4"-20 CH | 6.00 |
| KML3816F (3032001) (48072) |
|
Micro female lockdown lever 3/8"-16 CH, CHII | 7.00 |
| KOC1220H (3033007) |
 |
1/2"-20 Off-contact lock knob w/hole CH | 3.00 |
| KOC3824H (3033004) |
 |
3/8"-24 Off-contact lock knob w/hole CH-early | 2.50 |
| KSA5618M (3032002) (48150) |
 |
5/16"-18 Stroke adjustment lockdown lever CH, CHII | 7.00 |
| KSC3816K (3033001) (110023) |
 |
3/8"-16 Squeegee clamp knob
CH, CHII
 |
3.00 |
| KSL1032ML (3032000L) (48072) |
 |
SQ/FB adjustment lockdown lever 'must use washer FFWM10SS and/or FFWS10SS' CH-early | 7.00 |
| KSL1032MM (3032000M) (48072) |
 |
SQ/FB adjustment lockdown lever 'must use washers FFWM10SS and/or FFWS10SS' CH-early | 7.00 |
| KSL1032MS (3032000S) (48072) |
 |
SQ/FB adjustment lockdown lever CH | 7.00 |
| KSSL00BW |
 |
Selector switch lever (test/single/double) CH |
7.00 |
| LUBLTF02 |
 |
Tri-Flow w/teflon liquid 2 oz. bottle-excellent for valves and cyl's. WD-40 is a cutting agent and harmful to valves and cyl's. | 4.00 |
| LUB43K31 |
 |
Magnalube-G grease w/PTFE 3/4 oz tube for re-building air cylinders | 6.50 |
| OIL70000 (7017000) |
 |
10 wt ND oil 1 qt. | 3.00 |
| PAL075SK |
 |
Seal kit for air lock screen clamps | 7.50 |
| PAL09023 (2009023) |
 |
Air lock cyl w/screw thread end of shaft along with a back-up washer (FFWS10SS) to eliminate puncture through foot pad. CH | 41.00 |
| PAL09023B (2009023B) |
|
Air lock cyl w/barb end of shaft (FFWS10SS will work on this application also to eliminate puncture of foot pad) CH, CHII | 41.00 |
| PAL0MTV4 (2018121) |
 |
Air lock switch valve
5/32" ports
CH, CHII
|
24.00 |
| PAM00014 (2014000) |
 |
Muffler 1/4" pipe | 3.00 |
| PAM00018 (2014002) |
 |
Muffler 1/8" pipe | 2.50 |
| PAM00038 (2014001) |
 |
Muffler 3/8" pipe | 4.00 |
| PAT00012 (2001003) |
 |
1/2" Air tubing per ft. | 0.25 |
| PAT00014 (2001000) |
 |
1/4" Air tubing per ft. | 0.15 |
| PAT00516 (2001002) |
 |
5/16" Air tubing per ft. | 0.15 |
| PAT00532 (2001001) |
 |
5/32" Air tubing per ft. | 0.12 |
| PBB14X18 |
 |
Bushing 1/4" male pipe x 1/8" female pipe | 0.60 |
| PBF0012U |
 |
1/2" UNION | 5.00 |
| PBF0014P (2003027) |
 |
1/4" AIR PLUG | 1.00 |
| PBF0014U (2003022) |
 |
1/4" UNION | 3.00 |
| PBF0038P (2003042) |
 |
3/8" AIR PLUG | 1.50 |
| PBF0038U (2003060) |
 |
3/8" UNION | 4.00 |
| PBF014UT (2003021) |
 |
1/4" UNION TEE | 3.75 |
| PBF014UY (2003024) |
 |
1/4" UNION Y | 4.50 |
| PBF038UT (2003036) |
 |
3/8" UNION TEE | 5.50 |
| PBF0516P |
 |
5/16" AIR PLUG | 1.20 |
| PBF0532P (2003018) |
 |
5/32" AIR PLUG | 0.75 |
| PBF1238E (2003008) |
 |
1/2" tube x 3/8" pipe ELBOW | 5.50 |
| PBF1238S (2003003) |
 |
1/2" tube x 3/8" pipe STRAIGHT | 4.00 |
| PBF1414E (2003011) |
 |
1/4" tube x 1/4" pipe ELBOW | 2.75 |
| PBF1414S (2003015) |
 |
1/4" tube x 1/4" pipe STRAIGHT | 2.25 |
| PBF1418E (2003005) |
 |
1/4" tube x 1/8" pipe ELBOW | 2.50 |
| PBF1418S (2003001) |
 |
1/4" tube x 1/8" pipe STRAIGHT | 3.00 |
| PBF1418T (2003028) |
 |
1/4" tube x 1/8" pipe TEE | 0.00 |
| PBF14516R |
 |
1/4" tube into 5/16" fitting REDUCER | 3.50 |
| PBF14532R |
 |
5/32" tube into 1/4" fitting REDUCER | 2.00 |
| PBF3814E (2003013) |
 |
3/8" tube x 1/4" pipe ELBOW | 4.00 |
| PBF3814S |
|
3/8" tube x 1/4" pipe STRAIGHT | 3.50 |
| PBF3814T |
 |
3/8" tube x 1/4" pipe TEE | 5.80 |
| PBF3838E (2003009) |
 |
3/8" tube x 3/8" pipe ELBOW | 4.75 |
| PBF3838S |
 |
3/8" tube x 3/8" pipe STRAIGHT | 3.50 |
| PBF3838T |
 |
3/8" tube x3/8" pipe TEE | 7.25 |
| PBF5321E (2003031) |
 |
5/32" tube x 10-32 pipe ELBOW [air locks] | 2.50 |
| PBF5321S (2003023) |
 |
5/32" tube x 10-32 pipe STRAIGHT [air locks] | 2.00 |
| PBF5322BY (2003034) |
 |
5/32" tube x 1/8" pipe BRANCH UNION Y | 4.50 |
| PBF5322D |
 |
5/32" tube x 1/8" pipe DELTA UNION [Simple alternative to lower bulky distribution brass fitting on chopper cylinders ] CH-early | 3.00 |
| PBF5322E (2003004) |
 |
5/32" tube x 1/8" pipe ELBOW [chopper cyl's] | 3.75 |
| PBF5322S (2003000) |
|
5/32" tube x 1/8" pipe STRAIGHT | 2.50 |
| PBF532BT |
 |
5/32" tube x 1/8" pipe TEE | 3.50 |
| PBF532GT |
 |
5/32" tube x 1/8" pipe TEE [Simple alternative to upper bulky supply brass fitting on early chopper cylinders] GT-early | |
| PBF532UB (2003019) |
 |
5/32" tube UNION [black] | 2.25 |
| PBF532UG (2003019) |
 |
5/32" tube UNION [gray] | 2.25 |
| PNF532UT (2003021) |
 |
5/32" tube UNION TEE | 3.00 |
| PBF532UY (2003024) |
 |
5/32" tube UNION Y | 4.75 |
| PCC0751A (2009014) |
 |
3/4"x1" SS Chopper cylinder w/snap
ring CH
 |
24.00 |
| PCC0881A |
|
7/8"x1" SS Chopper cylinder w/snap
ring [Ideal for additional pressure control for squeegee on earlier
CH's without alterations] |
25.00 |
| PCC1061A (2009094) |
 |
1-1/16"x1" SS Chopper cylinder w/snap
ring CH
|
28.50 |
| PCF0300C (2009016) |
 |
 1 1/16"x3" SS Capture fork cylinder w/buna
N bumpers inside CH, CHII |
54.00 |
| PDIC1061 (2009031) |
|
1-1/16"X1" SS Double index lock cylinder CHII | 28.50 |
| PDMSQF3 |
 |
Air dump muffler 3/8" pipe | 7.75 |
| PEP45001 |
 |
45A valve end plate kit w/screws |
15.00 |
| PFC00003 (2012027) |
 |
3/8" pipe flow control muffler (valve) for 3.25" Mosier/Norgren index cyl CH | 19.00 |
| PFC00006 (2012009) |
 |
3/4" pipe flow control muffler (valve) for 5" Mosier/Norgren index cyl CH | 25.00 |
| PFC018PK (2018001) |
 |
1/8" pipe speed control valve for
stroke speed, lift speed and capture fork speed CH, CHII
 |
24.50 |
| PFC038PK (2018000) |
 |
3/8" pipe speed control valve for
lift speed, index speed on CH w/tolomactic index drive CH, CHII
|
31.50 |
| PFV0811C (2011000) |
 |
811C-PM-111AA-152 2-wire fork valve-CH, SQ/FB valve CHII |
75.00 |
| PIR16030 (2019001) |
 |
3/8" Index regulator CH |
34.00 |
| PIV55BAC |
 |
Index valve 55B-12-PI-591-JM 24VAC internal pilot for new Schrader replacement cyl for Mosier |
72.00 |
| PLC325X2 (2009000) |
 |
Lift cyl 3.25" bore x 2" stroke TRD MF1 3.25X2 (exchange) CH 8c/10c |
305.00 |
| PLC500SK |
 |
Lift cyl 5" bore x 2" stroke repair seal kit CH, CHII |
60.00 |
| PLC500X2 (2009001) |
 |
Lift cyl 5" bore x 2" stroke TRD MF1 5X2 (exchange) CH 12c/14c, CHII |
397.00 |
| PLV6311D (2011001) |
 |
6311D-211-PM-111DA Lift valve w/o base CH, CHII |
105.00 |
| PMC34302 (2012013) |
 |
Coil-Mosier index cyl stem 110V CH |
45.00 |
| PMCR10SNC (2009049) |
 |
3.25"X7" Mosier/Norgren index cyl S-A00592 <see PSC10SCH for new replacement> |
obsolete |
| PMCR12SC (2009048) |
|
3.25"X6" Mosier/Norgren index cyl S-A00591 <see PSC12SCH for new replacement> |
obsolete |
| PMCR14SC (2009025) |
 |
5"X5.75" Re-built Mosier index cyl S-A00594 includes new flow control mufflers CH12/14 (60 day warranty) EXCHANGE ONLY, $500 CORE CHARGE RETURNED IF OLD UNIT IS NOT DAMAGED IN ANY WAY |
price does not include core charge 1140.00 |
| PMG09834 |
 |
Manifold to valve gasket used on Mosier/Norgren index cyl w/3.25" bores CH |
3.75 |
| PMK0R025 |
 |
Mosier/Norgren 3.25" rod bushing CH8&10 color CH |
35.00 |
| PMK0R035 |
 |
Mosier/Norgren 5" rod bushing CH12&14 color CH |
53.00 |
|
|
|||
|
|
|||
| PMN51624 |
 |
Mosier/Norgren knurled nut to hold stem coil onto stem CH |
3.50 |
| PMR0020A (2019004) |
 |
Mini-regulator 1/4" pipe ports w/bushing for gauge mounting [w/o gauge] CH, CHII |
18.00 |
| PMS07110U (2017110) |
 |
Used Mosier/Norgren stem for coil mount on all index cyl's CH |
40.00 |
| PMSO0013 |
 |
Supply tube o-ring (013) for 3.25" Mosier/Norgren index cy CH | 0.50 |
| PMWOS516 |
 |
Mosier/Norgren wavy washer to retain knurl nut to stem CH | 2.00 |
| PNF2992C |
 |
Filter element poly 50 micron for Norgren B12 water trap CH |
10.50 |
| PNF3161G |
 |
Filter element poly 50 micron for Norgren B08 water trap CH |
8.00 |
| PNG00684 (2007118) |
 |
1/8" Drain cock for Norgren water trap/lubricator CH, CHII | 2.50 |
| PNG02315 |
 |
Bowl o-ring A12/L12 CH, CHII | 2.50 |
| PNG02796 |
 |
Nylon drain insert & o-ring at bottom of bowl B08/L08 & B12/L12 CH/CHII |
4.50 |
| PNG02797 |
 |
Drain insert nut for PNG02796 CH/CHII |
2.00 |
| PNG05055 |
 |
Oil dome assembly RED L08/L12 CH/CHII |
22.50 |
| PNG53l08 (2017133) |
 |
Oil fill plug w/0-ring (alum) for Norgren L08 CH |
4.00 |
| PNG53L12 |
 |
Oil fill plug w/o-ring (alum) for Norgren L12 CH/CHII |
9.50 |
| PNG706CK |
 |
Norgren FLR's site tube glass o-ring kit CH,CHII |
2.00 |
| PNGO0132 |
 |
Bowl o-ring B08 & L08 (132) CH | 2.00 |
| PPF014HP |
 |
1/4" pipe hex allen steel drain drain plug CH, CHII | 0.50 |
| PPF014SP (2006000) |
 |
1/4" pipe square head steel drain plug CH, CHII | 0.50 |
| PPF018SP |
|
1/8" pipe square head steel plug CH, CHII | 0.40 |
| PPF038SP |
 |
3/8" pipe square head steel plug CH, CHII | 0.50 |
| PPG16014 (2019003) |
 |
0-160# 1/4" NPT rear mount pressure gauge 2" dial CH, CHII | 9.00 |
| PPG16018 |
 |
0-160# 1/8" NPT rear mount pressure gauge 1.5" dial CH, CHII | 7.00 |
| PPS111BA (2017021) |
 |
Pilot solenoid PME-111BAAA 2-wire 811C-PM-111BA-152 stroke/squeegee valve CHII |
35.00 |
| PPS111JB (2017026) |
 |
Pilot/solenoid valve PME-111JM all 811C,821C &825C w/rectangular male plug CH |
45.00 |
| PPS14150 (1010009) |
 |
Low air pressure switch 1/4" NPTF pressure range 70-150 lbs, factory setting 95-125 lbs CH-all | 23.00 |
| PPS35024 |
 |
45A end plate assembly screw CH, CHII |
1.00 |
| PQE03340 (2015000) |
 |
Quick exhaust valve 3/8" port Tolomactic index cyl CH | 26.00 |
| PRA00075 (2012025) |
 |
RA-75 rod aligner 3/4"-16 on 3.25" Mosier/Norgren index cyl CH |
103.00 |
| PRA00100 (2012008) |
 |
RA-100 rod aligner on 5" Mosier/Norgren index cyl CH |
132.50 |
| PSC02500 (2009019) (330013) |
 |
1 1/16"X25" SS stroke cyl CH |
85.00 |
|
PSC10SCH
(2009049)
|
 |
NEW replacement index rod cylinder for CH8/10 fully dressed ready to mount. 3.25"bore x 7"stroke equal to S-A00592. Comes with individual replaceable valves. [state table travel direction when ordering] CH-all air drive [system must be free of moisture for 60 day warranty] |
955.00 |
|
PSC12SCH
(2009048)
|
|
NEW replacement index rod cyl for CH10/12 fully dressed ready to mount. 3.25"bore x 6" stroke equal to S-A00591. Comes with individual replaceable valves. [state table travel direction when ordering] CH-all airdrive [system must be free of moisture for 60 day warranty] |
945.00 |
| PSFLR034 (2020003) |
 |
SMC 3/4" port Filter/Regulator/Lubricator w/auto water drain w/o gauge AC40A-N06D-38Z CH, CHII (A very good FLR with easy maintenance and virtually free from water contamination in the lubricator) |
160.00 |
| PSFR0034 |
 |
3/4" Filter/Regulator w/auto water drain w/o gauge AW40-N06D-8Z CH, CHII |
95.00 |
| PSLUB0034 |
 |
3/4" Lubricator w/manual drain AL40-N06-38Z CH, CHII |
75.00 |
| PSMB0034 |
 |
FLR mounting bracket for 3/4" unit CH-all |
9.75 |
| PSP0J1KD (2017028) |
 |
45A lighted plug 1KD for 45A valve CH, CHII |
7.50 |
| PSV0045A (2017030) |
 |
45A squeegee valve 45A-SA1-DAAJ-1KA CH, CHII |
40.50 |
| PSVB4508 (2012002) |
 |
 Squeegee valve block assembly 45A type CH8/10 |
340.00 |
| PSVB4508C |
 |
Squeegee valve block assembly 8-45A type complete w/fittings CH8/10 |
394.00 |
| PSVB4510 (2012001) |
 |
Squeegee valve block assembly 45A type CH10/12 |
422.00 |
| PSVB4510C | Squeegee valve block assembly 10-45A type complete w/fittings CH10/12 | 488.00 | |
| PSV825CW (2010034) |
 |
825C-PM-111BA-852 2-wire stroke valve CHII |
115.00 |
| PTB01018 |
 |
63mm bearing rod for Tolomatic index
cyl CH
 |
32.00 |
| PTB01170 (2017063) |
 |
1" bearing rod for Tolomatic stroke
cyl CH
|
11.00 |
| PTSC0025 (2009012) |
 |
1" stroke cyl 25" |
375.00 |
| PTSC0033 (2009003) |
|
1" stroke cyl 33" OAL 41" |
410.00 |
| PTC01002 (2017085A) |
 |
1" End cap (new style) Tolomatic stroke cyl CH |
12.50 |
| PTC01167 (2017085) |
 |
1" End cap (old style) Tolomatic
stroke cyl CH
|
12.50 |
| PTC51002 (2017086A) |
|
63mm End cap (new style) Tolomatic
index cyl CH
|
16.00 |
| PTC51008 (2017086) |
 |
63mm End cap (old style) Tolomatic
index cyl CH
|
14.00 |
| PTCPA100 |
 |
1" bore tolomatic piston/bracket
assembly
|
46.00 |
| PTF51012 |
 |
Pressure foot insert for 1" Tolomatic stroke cyl w/new style end cap CH |
6.00 |
| PTS01012 |
 |
Pressure foot spring for 1" Tolomatic stroke cyl w/new style end cap CH |
1.25 |
| PTS14205 | 1/4"-20x1/2" Low head cap screw for 50/63 mm Tolomatic index cyl center screw CH | 0.50 | |
| PTS51658 |
|
5/16"-18x5/8" BHC screw for 50/63 mm Tolomatic index cyl end cap side screws CH | 0.75 |
| PTS63212 |
 |
6-32x1/2" BHC screw for 1" Tolomatic stroke cyl end cap side screws CH | 0.30 |
| PTS83238 |
 |
8-32x3/8" BHC screw for 1" Tolomatic stroke cyl end cap center screw CH | 0.20 |
| PVB6311D |
 |
6311D lift valve base CH, CHII |
20.00 |
| PVS0045A (2017023) |
 |
|
18.00 |
| SVF6X9CH |
 |
CH vent filter kit. Easy to keep lint from building up on vent louvers. Comes with velcro strips and 4 pre-cut foam filters. | 5.00 |
| TGF0018S (2003055) |
 |
1/8" pipe straight grease fitting CH, CHII | 0.75 |
| TGF01845 (2003032) |
 |
1/8" pipe 45 degree grease fitting CH, CHII | 1.00 |
| TIB150SBH (3023012) |
 |
CCFH 1 1/2 SB crowned index bearing with .875" heavy stud for CH, CHII |
32.00 |
| TIB150SBE |
 |
CCF 1 1/2 SB crowned index bearing with .625" stud CH-early |
29.00 |
| TLS03824 |
 |
3/8"-24x1.5" Pallet leveling stud CH, CHII [welding required] | 1.00 |
| TLS80411 (8080411) |
 |
Anti-lift spring for carrousel bearing race [to keep bearing race from following table up] CH | 3.75 |
| TQR0153R (9050153A) |
 |
Pallet quick release lever right-chromed steel CH, CHII-early | 51.00 |
| TQR0154L (9050154) |
|
Pallet quick release lever left-chromed steel CH, CHII-early | 51.00 |
| TRB0001S (3023010) |
 |
CF-1S 1" Registration bearing CH |
21.50 |
| TRF0308D (9080308D) (310404) |
 |
Registration fork 1" slot CH | 40.00 |
