|
TROUBLE
SHOOTING |
|
PRESS TECH [ph
817-244-7128][fax
817-244-7909] |
|
CAROUSEL/TABLE ROLLING OUT OR NOT STOPPING-This occurs when the index
bearing on the carousel rolls out of the capture fork and the table keeps
spinning. The problem is not enough air pressure to the capture fork cylinder
and/or the cylinder piston seals are worn. Also, if the cylinder is the OEM
fork cylinder which have cushion adjustments on it, they can be adjusted too
tight to keep the cylinder from slamming to a bottom out but not have enough
holding force to keep the fork engaged to the bearing.
PRESS TECH fork cylinders do not have cushion adjustments for this
reason but have rubber cushions inside the cylinder so pressure setting and
slamming are not a problem. |
| |
| |
| |
|