|
M&R Gauntlets |
|
PRESS TECH [ph 817-244-7128][fax 817-244-7909] Parts meet or exceed OEM Prices subject to change without notice |
|
12/29/2009 |
This page printable for catalog use. |
|
The first 4 digits of the 9 digit serial number indicates when the press was built by month then year. |
|
|
|
GTS-O [GT '90-'92, GTS '92-'96 approx dates] ['87-92 tolomatic index drive, '92-96 Mosier index drive] O=Omron CPU |
|
|
GTS-M '96-? [Mosier/Norgren index drive] M=Mitsubishi CPU |
|
|
GTR-O '92-'93 [Mosier index drive] O=Omron CPU |
|
|
GTR-M '93-'99 [Mosier index drive] M=Mitsubishi CPU |
|
|
GTII '96-Present [Servo index drive] Mitsubishi CPU |
|
|
GTRS '97-? [Air index drive] Mitsubishi CPU |
|
B-press base parts, E-electrical, F-fasteners, H-press head components, K-knobs & levers, P-pneumatic components, T-press table components |
|
|
Item |
Picture |
Description |
Price |
|
BIBORFL16 |
|
Index bushing o-ring FL-16 (126) |
1.25 |
|
BIBOFL16 |
|
Index bushing w/o-rings
GT-all w/Mosier cyl
 |
29.00 |
|
BIPGT608 (8050251D) |
Index slide (capture fork) plate GT-all |
0.00 |
|
|
BIS34X1E (3025001) |
|
3/4"x1" index shock GT-all w/air indexer |
229.00 |
|
BIS118X1E (3025000) |
Enertrol 1-1/8"x1" index shock GT tolomactic index cylinder |
338.00 |
|
|
BRB11834 (9050260) |
|
Reducer bushing for 3/4" index shock in place of 1-1/8" index shock GT-all w/air indexer |
55.00 |
|
BSJN0034 (3025001A) |
|
3/4" Index shock jam nut
GT-all
 |
11.00 |
|
BSJN0118 (3025000A) |
|
1-1/8" Index shock jam nut
GT-all
|
14.00 |
|
BLS00275 (9080215) |
|
Lift cylinder rod compression spring GT, GTII |
8.00 |
|
BSP00382 (3033021) |
|
Central off contact spring plunger latch GT-all |
26.00 |
|
BSSC0034 (8051259) |
|
3/4" Index shock stop collar
GT-all
|
39.00 |
|
BSSC0118 (8051260A) |
|
1-1/8" Index shock stop collar
GT-all
|
51.00 |
|
BTRC3416 (8050253) |
|
3/4"-16ODx7/16"-20x1-3/4"L [threaded rod connector for RA-44 to index plate] GT-all w/mosier index drive |
22.00 |
|
EBT0CK08 (1017016) |
|
CK battery GT-O all [date is on battery when made] |
70.00 |
|
EBTC2H09 |
|
C200H battery GTR-O [date is on battery when made] |
70.00 |
|
EBTF40BL (1017259) |
|
Mitsubishi battery F2-40BL for CPU FX2N-60MR GTRS |
70.00 |
|
ECBST01R (10100002A) |
|
BST-001 N/C E/stop contact block, selector switch, re-set switch (RED) GT-all |
7.00 |
|
ECBST10G (10100002B) |
|
BST-010 N/O E/stop, selector switch, re-set switch (GREEN) GT-all |
7.00 |
|
ECBSTD00 |
|
Dummy contact block for e/stop, selector switch, re-set switch [has no terminal screw contacts] GT-all |
0.40 |
|
ECMID212 (1017001) |
Omron ID212 input module C200H GTR-O |
0.00 |
|
|
ECMLK201 (1017013A) |
Omron LK201 link module C200H GTR-O |
0.00 |
|
|
ECMMD215 (1017005) |
|
MD215 input/ output module C200H GTR-O |
415.00 |
|
ECMOC222 (1017002) |
Omron OC222 output module C200H GTR-O |
0.00 |
|
|
ECPMR831 (1017004) |
Omron MR831 memory module/battery back-up C200H GTR-O |
0.00 |
|
|
ECPU200HR (1017000) |
 |
C200H CPU01-E CPU re-built GTR-O [OBSOLETE AS NEW] |
CALL |
|
ECPUC40KR (1017000) |
 |
C40K CPU re-built GT-O6/8 [OBSOLETE AS NEW] |
CALL |
|
ECPUC60K (1017008) |
|
C60K CPU re-built GT-O8/10 [OBSOLETE AS NEW] |
CALL |
|
ECRRH2B1 (1011005) |
|
Relay RH2BUL-120VAC 8 pin GTII |
13.00 |
|
ECRRH4B1 (1011021) |
Double pole RH4BUL-120VAC 14 pin GTII |
0.00 |
|
|
EDD31022 (1013003) |
|
LED digital diagnostic display GTR-O |
63.00 |
|
EDP4001F |
|
Diode set with fork terminal end-[from thumbwheel to print start/print finish switch] GT-O-all |
5.50 |
|
EDP4001M |
|
Diode set with male spade terminal connector-[from thumbwheel to no-shirt detector] GT-O-all |
5.50 |
|
EDS1N4F3 |
|
Diode set for single/double print switch GT-all |
8.50 |
|
EESAO300 |
|
AOD-100 E-stop push/push body (without red button) GT-O all, GTR-M |
21.00 |
|
EESAYW40 (1010040) |
|
AYW401-R E/stop push/pull complete switch GTS-M |
0.00 |
|
EESV4F01C (1010040) |
|
HW1B-V4F01-R E/stop push/turn complete switch GTS-M |
31.50 |
|
EFC00C90 |
|
Fan cord plug for 2 prong fan GTII |
3.00 |
|
EFG00003 |
|
3" wire fan guard GT-all |
2.50 |
|
EFG00004 |
|
4" wire fan guard GTII |
2.50 |
|
EFN115V3 (1009001) |
|
3" cooling fan 115V GT-all |
27.00 |
|
EFN115V4 (1009000) |
|
4" cooling fan 115V GTII |
29.00 |
|
EFNON001 |
|
NON 1 amp fan fuse GT-all
 |
2.00 |
|
EFNON1/2 |
|
NON 1/2 amp fan fuse
GT-all
|
3.00 |
|
EILS60GD (1013001) |
|
Green control panel indicator lamp w/resistor GT-O all |
3.50 |
|
ELP115RD (1013000) |
|
115V RED power lamp GT-O all |
4.50 |
|
EMA07803 (1010007) |
|
Manual/automatic switch and print start/print finish switch GT-all |
14.50 |
|
EOO2112R (1017158) |
|
On/Off print head switch w/red light GTRS |
18.00 |
|
EPB00172 (1010006) |
|
Print push button switch GT-all |
14.25 |
|
EPC0H7EC (1017006) |
 |
Omron print counter H7EC-N-B [replaces obsolete H7EC-BLM model] GT-O all |
72.00 |
| EPP03180 (1020034) |
 |
No-shirt detector 3 pin plug [black-pin #1 wire #3; red+green-pin #2 wire #4; white-pin #3 signal wire OR blue-pin #1 wire #3, pink+brown-pin #2 wire #4, black-pin #3 signal wire for MICRO FE7C-RC6G-M sensor] GT-all, GTII | 9.00 |
| EPS04180 (1020035) | No-shirt detector 3 pin socket [see above for wiring] GT-all, GTII | 8.50 | |
| ERPCYE2M (1010224) |
 |
4 pin plug-in round prox switch cable 2M long GTRS |
21.00 |
| ERPCYE5M (1010224L) | SEE ABOVE |
4 pin plug-in round prox switch cable 5M long GTII |
24.00 |
| ERPGM53A (1010012) |
 |
Round prox 3 wire w/terminal ends [blue-#3, brown-#4, black-signal (double digit #)][other brands black-#3, red-#4, white-signal (double digit#)] GT-all, GTII |
52.50 |
| ERS0SH2B (1011006) |
 |
Relay socket for RH2BB 8 pin relay GTII |
9.00 |
| ERS110NG (1010001) |
 |
Reset switch ABD110N-G 1-blank,1-N/O [GREEN] contact GT-O all |
27.00 |
| ESC028FR (8050121) |
 |
Safety cord right w/female end GT-all, GTII | 25.00 |
| ESC028ML (8050120) |
 |
Safety cord left w/male end GT-all, GTII | 21.00 |
| ESC50MFC (8050101) |
 |
Safety cord male/female 50" GT8-all | 31.00 |
| ESC52MFC (8050160) |
|
Safety cord male/female 52" GT6-all | 31.00 |
| ESD10013 (1010013) |
 |
Single/Double print switch ON/OFF/ON SPDT GT-all |
8.25 |
| ESPF703A (1010005) |
 |
Square proximity switch w/terminal ends [blue-#3, brown-#4, black-signal (double digit #)][other brands black-#3, red-#4, white-signal (double digit#)] GT-all |
40.00 |
| ESR01200 (7006000) |
 |
Strain relief bushing for safety cords GT-all | 0.25 |
| ESS3L20N |
 |
ASD3L20N 3 position selector switch body for Test/SingleIndex/DoubleIndex GT8-O |
11.00 |
| ETP10011 (1010011) |
 |
Front/Rear-Test Print-On/Off power switch SPST GT-all |
6.50 |
| ETW6502A (1010010) |
 |
Dwell timer thumbwheel switch GT-O-all |
24.00 |
| EVR175DC (1023000) |
 |
Varistor V130LA10A GTII | 2.00 |
| EWT00004 |
 |
Wire tie 4" type I class | 0.05 |
| EWT1614F (1003006) |
 |
BLUE female spade terminal end 14-16 GA. |
0.80 |
| EWT1614M (1003007) |
 |
BLUE male spade terminal end 14-16
GA.
|
0.80 |
| EWT2216F (1003008) |
 |
RED female flanged block fork terminal end 18-22 GA. #6 stud | 0.15 |
| EWT2218F (1003005) |
 |
RED female spade terminal end 18-22 GA.
|
0.50 |
| EWT2218M (1003004) |
 |
RED male spade terminal end 18-22
GA.
|
0.50 |
| FAB12214 (3047001) |
 |
1/2" concrete anchor bolt | 1.25 |
| FAB51625 (3047000) |
 |
5/16" concrete anchor bolt | 1.00 |
| FBH01412 (3001005) |
 |
BHC screw 1/4"-20x1/2" carrige top plate screws GT-all | 0.20 |
| FBH01458 (3001010) |
 |
BHC screw 1/4"-20x5/8" swing plate to micro plate | 0.20 |
| FBH05161 (3001007) |
 |
BHC screw 5/16"-18x1" | 0.35 |
| FBH3824P (3001078) |
 |
BHC screw 3/8"-24x1 1/2" [Alternative for broken pallet leveling studs on end of pallet arm. Must be welded on.] GT-all | 1.50 |
| FCS01024 |
 |
10-24x1/2" Press base cover hex screw GT-all | 0.10 |
| FCS10258 (3009045) |
 |
SHCS 10-24X5/8" Index pillow block mount screws GT air index-all | 0.20 |
| FCS1032L |
 |
SHCS 10-32x1 1/2" Index valve mount GT-all | 0.25 |
| FCS1420M (3009018) |
 |
SHCS 1/4"-20x1 1/4" cap screw capture fork cyl mount | 0.25 |
| FCS38161 (3009000) |
 |
SCHS 3/8"-16x1" cap screw | 0.30 |
| FCS38162 (3009073) |
 |
SCHS 3/8"-16x2" full thread registration bolt GT-all | 2.00 |
| FCS51681 (3009003) |
 |
SHCS 5/16"-18x1" stroke cylinder clevis mount GT-all | 0.25 |
| FCS83234 (3009032) |
 |
SHCS 8-32x3/4" air lock cylinder mount GT-all, GTII | 0.25 |
| FCT00001 |
 |
1" carpet tape (double stick) [for mounting index pillow mounts to index slide plate (5.5" needed per block)] per inch | 0.10 |
| FFC14201 (3010005) |
 |
1/4"-20x1" Flat head cap screw-head end plate top screw GT-all | 0.25 |
| FFS63212 (3004002) |
 |
6-32X1/2" Flat head cabinet panel screw | 0.10 |
| FFW00014 (3020005) |
 |
1/4" Flat washer SAE | 0.05 |
| FFW00038 (3020010) |
 |
3/8" Flat washer USS | 0.10 |
| FFW00058 (3020024) |
 |
5/8" Flat washer USS index bearing | 0.30 |
| FFW00078 (3020009) |
 |
7/8" Flat washer USS index bearing | 0.35 |
| FFW0012L (3020004) |
 |
1/2" Flat washer USS head and arm mounting | 0.15 |
| FFW0012S (3021000) |
 |
1/2" Flat washer SAE head and are mounting | 0.10 |
| FFW00516 (3020007) |
|
5/16" Flat washer USS | 0.10 |
| FFWM10SS |
 |
#10SS Flat washer 13/64"ID, 1/2"OD, .047TH squeegee/flood bar lock down lever | 0.05 |
| FFWS10SS |
|
#10SS Flat washer 13/16"ID, 7/16"OD, .032TH squeegee/flood bar lock down lever | 0.05 |
| FHB14206 (3008003) |
 |
1/4"-20x5/8" Hex bolt squeegee/flood bar angle adjustment GT-all | 0.10 |
| FHB381615 (3008005) |
 |
3/8"-16x1 1/2" Hex bolt full thread for flash mount to head GT-all | 0.25 |
| FHN00632 |
 |
6-32 Hex nut for cabinet panel screw | 0.05 |
| FHN01213 (3013027) |
 |
1/2"-13 Hex nut-head and arm mounting bolts GT-all | 0.10 |
| FHN01220 (3013002) |
|
1/2"-20 Hex nut-screen holder mounting rods GT-all | 0.15 |
| FHN03816 (3013007) |
 |
3/8"-16 Hex nut | 0.10 |
| FHN3824 (3013008) |
|
3/8"-24 Hex nut | 0.10 |
| FHN71620 (3013012) |
 |
7/16"-20 Hex nut grade 5-registration bearings [RA-44 rod aligner] GT-all | 0.15 |
| FJN01220 (3013023) |
|
1/2"-20 Jam nut-screen holder mounting rod GT-all | 0.20 |
| FJN01428 (3013005) |
 |
1/4"-28 Jam nut for chopper shaft GT-all | 0.05 |
| FJN03816 (3013014) |
 |
3/8"-16 Jam nut | 0.10 |
| FJN03824 (3013015) |
 |
3/8"-24 Jam nut-pallet leveling | 0.10 |
| FJN51624 (3013032) |
|
5/16"-24 Jam nut | 0.10 |
| FJN71620 |
|
7/16"-20 Jam nut grade 5 [RA-44 rod aligner] GT-all | 0.20 |
| FLN01024 (3012002) |
 |
10-24 Nylon lock nut | 0.10 |
| FLN01420 (3012000) |
|
1/4"-20 Nylon lock nut | 0.10 |
| FLW00038 (3022002) |
 |
3/8" Lock washer | 0.05 |
| FLW00014 (3022001) |
 |
1/4" Lock washer | 0.03 |
| FLW00716 |
|
7/16" Lock washer | 0.10 |
| FPS63278 (3005008) |
 |
6-32x7/8" Round head prox screw GT-all | 0.05 |
| FRE1428F (3034002) |
 |
1/4"-28 Female rod end-Chopper cylinder rod GT-all | 5.50 |
| FRE3824F (3034002) |
 |
3/8"-24 Female rod end-Micro adjustment GT-all | 7.00 |
| FRE3824ML (3034003L) |
 |
3/8"-24 Male rod end long stud w/nut-Micro pivot GT-all | 7.00 |
| FRE3824MS (3034003S) |
|
3/8"-24 Male rod end short stud w/nut -Micro pivot GT-all | 7.00 |
| FRE5624F (3034001) |
 |
5/16"-24 Female rod end-Stroke & Capture fork cylinder rod GT-all | 6.00 |
| FRG0058S | Grommet 5/8"Hx1/8"GWDx7/8"G diameter | 0.40 | |
| FRG0932AL |
 |
Grommet 9/32"Hx5/32"GWDx3/8"G diameter | 0.25 |
| FRG1764AL |
 |
Grommet 17/64"Hx1/8"GWDx13/32"G diameter [chopper airlines through carriage top plate] HTP131RA | 0.25 |
| FRS63212 (3004002) |
|
6-32x1/2" Pan head cabinet screw | 0.10 |
| FRS83212 |
 |
8-32x1/2" Pan head cabinet screw-for enlarged holes | 0.10 |
| FSB01412 (3006002) |
 |
1/4"x3/4"x10-24 Pivot mount shoulder bolt for flip-up screen holder | 1.50 |
| FSB03834 (3006009) |
 |
3/8"x3/4" shoulder bolt | 2.00 |
| FSB1458A |
 |
1/4"x5/8"x10-24 shoulder bolt w/nut and washers [chopper cylinder connection to mounting bar] GT-all | 2.00 |
| FSB51612 (3006010) |
 |
5/16"x3/4"x1/4"-20 shoulder bolt [stroke cylinder rod end attachment] GT-all | 1.25 |
| FSB51614A (3006015A) |
 |
5/16"X1 1/4"X1/4"-20 Shoulder bolt w/nut [clevis fork rod end attachment] GT-all, GTII | 2.00 |
| FSPN3816 | 3/8"-16 tapered set nut for Central-Off-Contact spring plunger GT-all | 2.00 | |
| FSR00025 (3024015) |
 |
1/4" external snap ring [chopper cylinder to bar attachment] GT-all | 0.15 |
| FSR15625 (3024000) |
 |
1 9/16" Internal snap ring [index pillow block bushing retainer] GT-all | 0.75 |
| FSS14114 (3007007) |
 |
1/4"-20x1 1/4" set screw [flip up screen holder lockdown] GT-all w/flip-up head | 0.50 |
| FSS71620 |
 |
7/16"-20x1 3/4" attachment set screw [RA-44 to index cylinder] GT-all | 2.00 |
| FSW02153 (9102153) |
 |
Spherical washer for pallet leveling GT-all, GTII | 1.00 |
| FTC03816 (9012111) |
 |
3/8"-16IDx9/16"-12OD [threaded insert for repairing stripped-out holes] (use 31/64" or 1/2" drill bit w/red loctite on outer threads) | 1.25 |
| FWL3816S (3003003) |
 |
3/8"-16x1" Whiz lock-index and arm attachment GT-all, GTII | 0.60 |
| HAB0109A (8080109) |
 |
Bar adjuster
[chopper cylinder to top plate
adjuster]
GT-all
(improved-additional threaded hole added 180 degrees across)
TIP: Coat center threads with anti-siege compound to eliminate cross threading of HBS3816A shaft. |
63.00 |
| HBS00250 (8010013) |
 |
Barbed clamp stud 3/8"-16x2.5" ALL | 4.50 |
|
HBS07516 (9161005)
|
 |
Head bumper shock. Made of Elastomer which outlasts polyurethane bumpers and chemical resistant. Fits all with air drive heads. Use old shock jam nut to mount bumper. To set position on NON stroke adjuster, turn bumper until it touches carriage at the end of the stroke, then bumper 3 full turns and lock jam nut) | 28.50 |
| HCA3816A |
 |
Top plate chopper adjustment knob and stud | 8.00 |
| HCP14X1A |
 |
Chopper pin w/snap ring for cylinder to bar adjuster connection GT-all | 1.50 |
| HCS0250A |
 |
Barbed end clamp stud w/knob and cup washer 3/8"-16x2 1/2" GT-all, GTII | 9.50 |
| HCW40217 (8010005) |
 |
Cup washer-foot pad for screen lockdown and squeegee clamp GT-all, GTII | 1.00 |
| HCXUFQRT |
 |
PRESS TECH quick release mounting tubes for Omni-Uni flash w/bolts GT-all | 10.00 |
| HCXGFM11 |
 |
CXG flash mount to head | 10.00 |
|
HEPF03GT (8050103)
|
 |
Front head carriage end plate with top and bottom screws GT, GTS | 68.00 |
|
HEPR04GT (8050104)
|
 |
Rear head carriage end plate with top screws GT, GTS | 73.00 |
| HHS75045 (3025002) |
 |
Head shock 3/4"-16x3" GT-all, GTII | 53.00 |
| HLB160HD (3023007) |
 |
1" Heavy Duty stainless steel linear ball bearing for carriage slide rail "will last longer than original" GT-all, GTII |
43.00 |
| HMA0056A (8090056) |
 |
Micro adjuster-4" long (left/right) GT-all, GTII | 8.50 |
| HMA057A (8090057) |
 |
Micro adjuster-3.25" long (up/down) GT-all, GTII | 8.00 |
| HMLW0010 (8090132) |
 |
Micro lockdown washer GT-all, GTII | 9.75 |
| HOS1201A (8090034L) |
 |
Spacer for off contact adjustment rods SS 1/2"x1" lower GT-all | 2.50 |
| HOS12060 (8080156) |
 |
Off contact stud 1/2"-12x6" rear GT-all | 5.00 |
| HOS12070 (9071104-1) |
|
Off contact stud 1/2"-20x7" front GT-all | 6.00 |
| HOS1234A (8090034) |
|
Spacer for off contact adjustment rods SS 1/2"x3/4" upper GT-all | 2.25 |
| HPM80143 (8080143) |
 |
Hanger bracket mount (pivot) for flip-up screen holder GT | 21.00 |
| HSB01010 |
 |
Elastomer shock bumper-medium 1.09"x.98" replacement for HBS07516 | 12.00 |
| HSH1712M |
 |
17" Re-built screen holder, 1/2" mounting holes, steel threaded inserts, new manual lockdown knobs w/foot pads (EXCHANGE ONLY) later GT-all | 25.00 |
| HSH1738M |
 |
17" Re-built screen holder, 3/8" mounting holes, steel threaded inserts, new manual lockdown knobs w/foot pads (EXCHANGE ONLY) early GT | 25.00 |
| HSL903FS |
 |
Flood Speed/Squeegee Speed labels (7009001 Flood) (7009005 Squeegee) GT-all | 1.25 |
| HSP0REPR |
  |
Repair broken flip-up screen holder (steel) with reinforcing straps for added strength to eliminate future breaks. (REPAIRED PLATE ON THE RIGHT) [NOT A STOCKING ITEM] | 37.50 |
| HTP00130 (8090130) |
 |
Head top plate w/air lock holes GT-all | 8.00 |
| HTP045LA (8090045) |
 |
Carriage chopper adjustment top plate assembly
GT-all, both sides
[except GTR-M
which right side uses
HTP131RA]
TIP: Coat threads with anti-siege compound to eliminate cross threading of HAB0109A |
32.00 |
| HTP131RA (8090131) |
 |
Carriage chopper adjustment top plate assembly GTR-M 10/93 and later,
right side TIP: Coat threads with anti-siege compound to eliminate cross threading of HAB0109A |
35.00 |
| KEKABD3B |
 |
E-stop mushroom knob push/push for EESAO100 |
8.50 |
| KEKAYW4B |
E-stop knob push/pull for AYW400 |
0.00 | |
| KFL1420F (3033016) |
 |
Flip-up screen holder lockdown lever 1/4"-20 GT-all | 6.00 |
| KFL1420M (3032004) |
 |
Flip-up screen holder lockdown lever 1/4"-20x.78" stud GTS-late (used without stud mounted) | 6.00 |
| KML3816F (3032001) |
|
Micro lockdown lever 3/8"-16 GT-all, GTII | 7.00 |
| KOC1220H (3033007) |
 |
Off-contact adjustment/lockdown knob 1/2"-20 GT-all | 3.00 |
| KOC3824H (3033004) |
 |
Off-contact adjustment/lockdown knob 3/8"-24 GT-early | 2.50 |
| KSA5618M (3032002) |
 |
Stroke adjustment/rear screen holder adjustment lever 5/16"-18 GTR-M, GTII | 7.00 |
| KSC3816K (3033001) |
 |
Squeegee clamp knob GT-all, GTII
 |
3.00 |
| KSL1032ML (3032000L) |
 |
SQ/FB adjustment lockdown lever 'must use washers FFWM10SS and/or FFWS10SS' GT-early | 7.00 |
| KSL1032MM (3022000M) |
 |
SQ/FB adjustment lockdown lever 'must use washers FFWM10SS and/or FFWS10SS' GT-all | 7.00 |
| KSL1032MS (3022000) |
 |
SQ/FB adjustment lockdown lever GT-all | 7.00 |
| KSSL00BW |
 |
Selector switch lever
(test/single/double)
GTS8-O, GT-O
 |
2.50 |
| LUBLTF02 |
 |
Tri-Flow w/teflon liquid lubricant 2 oz bottle-excellent for valves and cylinders to displace water and sticky components. WD-40 is a cutting agent and harmful to pneumatic components. | 4.00 |
| OIL70000 (7017000) |
 |
10 wt Non-detergent oil 1 qt | 3.00 |
| PAL075SK |
 |
Seal kit for air lock screen clamps | 7.50 |
| PAL09023 (2009023) |
 |
Air lock cylinder w/screw thread end of shaft along with a back-up washer (FFWS10SS) to eliminate puncture through foot pad GT-all | 41.00 |
| PAL09023B (2009023B) |
|
Air lock cylinder w/barb end of shaft (FFWS10SS will work on this application also to eliminate puncture of foot pad) GT-all | 41.00 |
| PAL0MTV4 (2018121) |
 |
Air lock switch valve
5/32" ports GT-all, GTII
 |
24.00 |
| PAM00014 (2014000) |
 |
Muffler 1/4" pipe | 3.00 |
| PAM00018 (2014002) |
 |
Muffler 1/8" pipe | 2.50 |
| PAM00038 (2014001) |
 |
Muffler 3/8" pipe | 4.00 |
| PAT00012 (2001003) |
 |
1/2" Air tubing per ft. | 0.25 |
| PAT00014 (2001000) |
 |
1/4" Air tubing per ft. | 0.15 |
| PAT00516 (2001002) |
 |
5/16" Air tubing per ft. | 0.15 |
| PAT00532 (2001001) |
|
5/32" Air tubing per ft. | 0.12 |
| PBB14X18 |
 |
Bushing 1/4" male pipe x 1/8" female pipe | 0.60 |
| PBF0012U |
 |
1/2" UNION | 5.00 |
| PBF0014P (2003027) |
 |
1/4" AIR PLUG | 1.00 |
| PBF0014U (2003022) |
 |
1/4" UNION | 3.00 |
| PBF0038P (2003042) |
 |
3/8" AIR PLUG | 1.50 |
| PBF0038U (2003060) |
 |
3/8" UNION | 4.00 |
| PBF014UT (2003021) |
 |
1/4" UNION TEE | 3.75 |
| PBF014UY (2003024) |
 |
1/4" UNION Y | 4.50 |
| PBF038UT (2003036) |
 |
3/8" UNION TEE | 5.50 |
| PBF038UY |
 |
3/8" UNION Y | 8.00 |
| PBF0516P |
 |
5/16" Air plug | 1.20 |
| PBF0532P (2003018) |
 |
5/32" Air plug | 0.75 |
| PBF06P0M |
 |
Manifold 5/32" outlet ports x 5/16" inlet ports [used for adapting air lock system on earlier] GT's | 18.00 |
| PBF1212T |
|
1/2" Union tee | 0.00 |
| PBF1238E (2003008) |
 |
1/2" tube x 3/8" pipe ELBOW | 5.50 |
| PBF1238S (2003003) |
 |
1/2" tube x 3/8" pipe STRAIGHT | 4.00 |
| PBF1238T |
 |
1/2' tube x 3/8" pipe TEE | 0.00 |
| PBF1414C (2010100) |
 |
1/4" tube cartriage | 5.00 |
| PBF1414E (2003011) |
 |
1/4" tube x 1/4" pipe ELBOW | 2.75 |
| PBF1414S (2003015) |
 |
1/4" tube x 1/4" pipe STRAIGHT | 2.25 |
| PBF1414T |
 |
1/4" tube x 1/4" pipe TEE | 0.00 |
| PBF1418E (2003005) |
 |
1/4" tube x 1/8" pipe ELBOW | 2.50 |
| PBF1418S (2003001) |
|
1/4" tube x 1/8" pipe STRAIGHT | 3.00 |
| PBF1418T (2003028) |
 |
1/4" tube x 1/8" pipe TEE | 0.00 |
| PBF14516R |
 |
5/16" tube into 1/4" tube REDUCER | 3.50 |
| PBF14532R |
 |
5/32" tube into 1/4" tube REDUCER | 2.00 |
| PBF3812T |
|
3/8" tube x 1/2" pipe TEE | 0.00 |
| PBF3814E (2003013) |
 |
3/8" tube x 1/4" pipe ELBOW | 4.00 |
| PBF3814S |
 |
3/8" tube x 1/4" pipe STRAIGHT | 3.50 |
| PBF3814T |
|
3/8" tube x 1/4" pipe TEE | 5.80 |
| PBF3838E (2003009) |
 |
3/8" tube x 3/8" pipe ELBOW | 4.75 |
| PBF3838S |
 |
3/8" tube x 3/8" pipe STRAIGHT | 3.50 |
| PBF3838T |
|
3/8" tube x 3/8" pipe TEE | 7.25 |
| PBF5321E (2003031) |
 |
5/32" tube x 10-32 pipe ELBOW (air locks) GT-all, GTII | 2.50 |
| PBF5321S (2003023) |
 |
5/32" tube x 10-32 pipe STRAIGHT (air locks) GT-all, GTII | 2.00 |
| PBF5322BY (2003034) |
 |
5/32" tube x 1/8" pipe BRANCH UNION Y | 4.50 |
| PBF5322D |
 |
5/32" tube x 1/8" pipe DELTA UNION [Simple alternative to the lower bulky distribution brass fitting on early chopper cylinders] GT-all-early | 3.00 |
| PBF5322E (2003004) |
 |
5/32" tube x 1/8" pipe ELBOW (chopper) GT-all | 3.75 |
| PBF5322S (2003000) |
|
5/32" tube x 1/8" pipe STRAIGHT | 2.50 |
| PBF532BT |
 |
5/32" tube x 1/8" pipe TEE | 3.50 |
| PBF532GT |
 |
5/32" tube x 1/8" pipe TEE [Simple alternative to the upper bulky supply brass fitting on early chopper cylinders] GT-all-early | 3.50 |
| PBF532UB (2003019) |
 |
5/32" tube UNION-black | 2.25 |
| PBF532UG (2003019) |
 |
5/32" tube UNION-gray | 2.25 |
| PBF532UT (2003021) |
 |
5/32" tube UNION TEE | 3.00 |
| PBF532UY (2003024) |
 |
5/32" tube UNION Y | 4.75 |
| PCC0751A (2009014) |
 |
3/4"x1" SS Chopper cylinder w/snap ring
GT-all
|
24.00 |
| PCC0881A |
|
7/8"x1" SS Chopper cylinder w/snap ring
GT-all
[Ideal for additional pressure control for squeegee on earlier GT's without alteration]
|
25.00 |
| PCC1061A (2009094) |
 |
1-1/16"x1" SS Chopper cylinder w/snap ring
GT-all
|
28.50 |
| PCF0200C (2009015) |
 |
|
51.00 |
| PCF0300C (2009016) |
 |
|
54.00 |
| PDIC061 (2009031) |
|
1-1/16"x1" SS Double index lock cylinder GTII | 28.50 |
| PDMSQF3 |
 |
Air dump muffler 3/8" pipe | 7.75 |
| PDV0055B (2010018) |
 |
55B-12-PE-111CA dump valve 110VAC 2-wire GTR-M |
72.00 |
| PEP45001 |
 |
45A valve end plate kit w/screws |
15.00 |
| PFC00003 (2012027) |
 |
3/8" pipe flow control muffler for 2.5" index cylinder valve GT-all air index | 19.00 |
| PFC018PK (2018001) |
 |
|
24.50 |
| PFC038PK (2018000) |
 |
3/8" pipe speed control valve for lift speed
GTII
 |
31.50 |
|
PICPH08S (2009362)
|
 |
Index cyl 100mm bore x 8" stroke ML300097 (EXCHANGE) GTRS 6/8 |
736.00 |
|
PICPH10S (2009357)
|
SEE PICTURE ABOVE |
Index cyl 100mm bore x 7.164" stroke ML300125 (EXCHANGE) GTRS 8/10 |
736.00 |
|
PICPH12S (2009356)
|
SEE PICTURE ABOVE |
Index cyl 100mm bore x 6" stroke ML-300126 (EXCHANGE) GTRS 10/12 |
736.00 |
|
PIR21030 (2019071)
|
 |
Dial-Air index regulator R21-03-000 GTRS |
91.00 |
| PIV0721C (2011003) |
 |
721C-12-PI-111-JD index valve for Tolomatic cylinder GT-all early air index |
100.00 |
| PIV55BAC |
 |
Index valve 55B-12-PI-111-JM 110VAC internal pilot for new Schrader replacement index cyl GT |
72.00 |
| PIV55BDC (2010073) |
|
Index valve 55B-12-PI-591-JM 24VDC internal pilot GTRS |
72.00 |
| PLC325X2 (2009000) |
 |
Lift cyl 3.25" bore x 2" stroke TRD MF1-3.25X2-HC (exchange) GT,GTRS |
280.00 |
| PLV0711C (2011002) |
 |
711C-12-PI-111-JD lift valve GT-all |
70.00 |
| PLV6311D (2011001) |
 |
6311D-211-PM-111DA lift valve wo/base GTII |
105.00 |
| PMC08SGR (2009040) |
 |
Mosier/Norgren index cyl 2.5"x8" S-A00590 <see PSC08SGT for new replacement> |
obsolete |
| PMC10SGR (2009005) |
|
Mosier/Norgren index cyl 2.5"x6.5" S-A00589 <see PSC10SGT for new replacement> |
obsolete |
| PMC34302 (2012013) |
 |
Mosier index cylinder stem coil 110V GT-all w/Mosier or Norgren index cylinder |
45.00 |
| PMG09834 |
 |
Mosier valve to manifold gasket 2.5" index cylinder |
3.75 |
| PMK0R015 |
 |
Rod bushing for Mosier/Norgren 2.5" index cylinder |
obsolete |
|
|
|||
| PMN51624 |
 |
Mosier/Norgren stem knurl nut for holding coil onto stem
|
3.50 |
| PMR0020A (2019004) |
 |
Mini-regulator 1/4" pipe ports w/bushing for
gauge mounting
[w/o gauge]
GT-all, GTII
 |
18.00 |
| PMS07110U (2017110) |
 |
Used Mosier stem for coil mount on 2.5" Mosier/Norgren
index cylinder GT-all w/Mosier index
 |
40.00 |
| PMSO0013 |
 |
Supply tube o-ring (013) for 2.5" Mosier/Norgren index cylinder | 0.50 |
| PMWOS516 |
 |
Mosier wavy stem washer to retain knurl nut onto
stem |
2.00 |
| PNF3161G |
 |
50 micro filter cartridge for B08 water trap |
8.00 |
| PNG00684 (2007118) |
 |
1/8" pipe drain cock for FLR drains GT-all | 2.50 |
| PNG02796 (2017117) |
 |
Nylon drain insert & o-ring for
B08/L08 &
B12/L12 drain ports GT-all |
4.50 |
| PNG02797 (2007119) |
 |
Nylon insert nut for #PNG02796 GT-all
|
2.00 |
| PNG05055 |
 |
Oil dome assembly for Norgren L08 lubricator
GT-all |
22.50 |
| PNG53L08 (2017133) |
 |
B08/L08 lubricator oil fill cap-aluminum
GT-all |
4.00 |
| PNG706CK |
 |
B08/L08 site tube o-ring kit
|
2.00 |
| PNGO0132 |
 |
B08/L08 bowl o-ring (132)
|
1.00 |
| PPF014HP |
 |
1/4" pipe hex allen steel drain plug | 0.50 |
| PPF014SP (2006000) |
 |
1/4" pipe square head steel drain plug | 0.50 |
| PPF018SP |
|
1/8" pipe square head steel plug | 0.40 |
| PPF038SP |
 |
3/8" pipe square head steel plug | 0.50 |
| PPG16014 (2019003) |
 |
0-160# 1/4" NPT rear mount pressure gauge 2" dial GT-all | 9.00 |
| PPG16018 |
 |
0-160# 1/8" NPT rear mount pressure gauge 1.5" dial GT-all | 7.00 |
| PPG20014 | 0-200# 1/4" NPT pressure gauge 2" dial GT-all | 6.40 | |
| PPS0055B (2010018) |
 |
Pilot/solenoid PED-111CA 2-wire for 55B-12-PE-111CA valve GTR-M |
40.00 |
| PPS111JM (2017026A) |
 |
Pilot/solenoid valve PID-111JM for 711C-12-PI-111JD & 721C-12-PI-111JD valves GT-all |
46.00 |
| PPS35024 |
 |
45A end plate assembly screw |
1.00 |
| PQE03340 (2015000) |
 |
Quick release air valve 3/8" ports for Tolomatic index cylinder GT-air index early | 26.00 |
| PRA00044 (2012021) |
 |
RA-44 rod aligner 7/16"-20 used to connect index
cylinder to index slide plate GT-all w/Mosier
index cylinder. Use 16mm wrench on flats |
74.00 |
| PSC01900 (2009013) |
 |
Stroke cylinder 1 1/16"x19" Stainless Steel GT6 |
75.00 |
| PSC02100 (2009065) |
|
Stroke cylinder 1 1/16"x21" Stainless Steel GT8 {will work in place of 2009086} |
80.00 |
|
PSC0AS21 (2009355)
|
 |
Stroke cyl 1 1/8" bore x 21" stroke Aluminum (re-build able) GTRS | 136.00 |
|
PSC08SGT (2009040)
|
 |
NEW replacement index rod cylinder for GT 6/8 fully dressed ready to mount. 2.5" bore x 8" stroke equal to S-A00590. Comes with individual replaceable valves. EXCHANGE ONLY FOR OLD MOSIER, $350 REFUNDABLE CORE CHARGE [state table travel direction when ordering] GT-all w/air drive [system must be free of moisture for 60 day warranty] |
price doesn't include core charge 865.00 |
|
PSC10SGT (2009005)
|
|
NEW replacement index rod cylinder for GT 8/10 fully dressed ready to mount. 2.5"bore x 6.5"stroke equal to S-A00589. Comes with individual replaceable valves. EXCHANGE ONLY FOR OLD MOSIER, $350 REFUNDABLE CORE CHARGE [state table travel direction when ordering] GT-all w/air drive [system must be free of moisture for 60 day warranty] |
price doesn't include core charge 850.00 |
| PSD00VM4 (2021018) |
 |
Squeegee chopper air dump valve GTS-M-late (2021018) |
39.00 |
| PSFLR012 (2020000) |
 |
1/2" port filter/regulator/lubricator w/automatic water drain wo/gauge GT-all, GTII (A very good FLR with easy maintenance and virtually free from water contamination in the lubricator) |
125.00 |
| PSP0J1KD (2017028) |
 |
1KD lighted coil plug for 45A valves GT-all, GTII |
7.50 |
| PSV0045A (2017030) |
 |
45A stroke/squeegee valve 45A-SA1-DAAJ-1KA GT-all, GTII |
40.50 |
| PSV2151K (2010071) |
 |
Stroke valve or squeegee/flood bar valve VQZ2151K-5LO-X64 GTRS |
64.00 |
| PSVB4506 (2012000) |
 |
 6 color squeegee valve block assembly 6-45A type GTR6/8 |
258.00 |
| PSV4506C |
 |
6 color squeegee valve block assembly 6-45A complete w/fittings GTR6/8 |
302.00 |
| PSVB4507 (2012005) |
 |
6 color stroke valve block assembly 7-45A type GT 6/8-all |
299.00 |
| PSVB4508 (2012002) |
 |
8 color squeegee valve block assembly 8-45A type GTR8/10 |
340.00 |
| PSVB4508C |
 |
8 color squeegee valve block assembly 8-45A complete w/fittings GTR8/10 |
394.00 |
| PSVB4508RC |
 |
6 color Revolver stroke valve block assembly 8-45A type complete w/fittings, excluding fork control valves GTR6/10 |
399.00 |
| PSVB4509 (2012006) |
 |
8 color stroke valve block assembly 9-45A type GT8/10-all |
381.00 |
| PSVB4509C |
 |
8 color stroke valve block assembly 9-45A type complete w/fittings, excluding fork control valves GT8/10-all |
447.00 |
| PTB01022 |
 |
 50mm Tolomatic index cylinder bearing rod
GT-all Tolomatic index cylinder |
23.00 |
| PTC01008 |
 |
50mm old style-Tolomatic end cap on index cylinder GT-all early w/air index |
12.00 |
| PTS14205 | 1/4'-20x1/2" Low head cap screw for 50mm end cap | 0.50 | |
| PTS51658 |
 |
5/16"-18x5/8" BHC screw for 50mm end cap | 0.75 |
| PVB6311D |
 |
Valve base 6311D-211 for 6311D-211-PM-111DA lift valve GTII |
20.00 |
| PVS0045A (2017023) |
 |
45A Coil (solenoid) DAAJ-1KJ GT-all,GTII |
18.00 |
| PVS225SC |
 |
Valve solenoid/coil for #PSV2151K VV5Q225-02N7TC (X165) GTRS |
24.00 |
|
STROKER |
 |
GT stoke adjustment designed and
built by PRESS TECH to allow the capability of stroke adjustment for older
Gauntlets that did not come with stroke adjusment. It comes with a shock
and removable flag to trigger the prox switch. GT-O, GTS-O, GTR-O, GTS-M |
135.00 w/bumper shock |
| STROKFLG |
 |
STROKER prox flag | 6.50 |
| STRKLEVR |
 |
STROKER lockdown lever and shaft | 9.00 |
| SVF5X6GT |
 |
GT vent filter kit. Easy to keep lint from building up on vent louvers. Comes with velcro strips and 4 pre-cut foam filters. | 4.00 |
| TGF0018S (2003055) |
 |
1/8" pipe straight grease fitting GT-all | 0.75 |
| TGF01845 (2003032) |
 |
1/8" pipe 45 degree grease fitting GT-all, GTII | 1.00 |
| TIB125SBH (3023011) |
 |
CCFH 1 1/4" SB crowned index bearing w/heavey duty stud .750" on newer GTS, GTS-O, GTR-O, GTS-M, GTR-M, GTRS-M |
27.00 |
| TLS03824 |
 |
Pallet leveling stud 3/8"-24x1.5" to be welded in place of damaged one. GT-all | 1.00 |
| TLS80411 (8080411) |
 |
Anti-lift spring for carrousel bearing race GT-all | 3.75 |
| TQR0153R (9050153A) |
 |
Pallet quick release right-chromed steel GT-all, GTII-early | 51.00 |
| TQR0154L (9050154) |
|
Pallet quick release left-chromed steel GT-all. GTII-early | 51.00 |
| TRB0001S (3023010) |
 |
1" Registration bearing CF-1S GT-all, GTRS |
21.50 |
| TRF0308D (9080308D) |
 |
Registration fork 1" slot GT-all | 40.00 |
| ZBAR0GTS (9080312F) |
 |
Registration bar (Z-bar) top bar-11",vertical bar-6.5", lower bar-21" GTS, GT-early'91 on w/low profile pallet mounts | 105.00 |
|
|
|
